Description of Addition Cure Molding Silicone RubberMC Silicone addition cure molding silicone rubber is a two component elastomer cross-linking at room temperature. The polymerization can be accelerated by heat. The silicone components are delivered as liquids, which once mixed and cured transform into a transparent, elastic and resistant material. Polymerization occurs without formation of heat.
Features of Addition Cure Molding Silicone RubberHigh Transparency
High tear and tensile strength
Long shelf life with low shrinkage
Easy mixing
Applications of Addition Cure Molding Silicone RubberLabel manufacturing, Molding applications requiring low shrinkage e. G. Toys, jewelry, automotive, rapid prototyping etc.
Typical properties of Platinum Cure Liquid Silicone For MoldingItem No.: RTV1040A/B
Color Transparent
Specific Gravity(g/cm3, approx. ) 1.1
Proportion(A: B) 100: 10
Mixing viscosity(at 23° Capprox. )65000
Max working time(at 23° C, minutes) 60
De-molding time(at 23° C, hrs, approx. ) 8-12
Hardness (after 24 h) 40 Shore A
Tensile Strength(Mpa, after 24 h) 5-6
Elongation (%) ≥ 350
Tear Strength (N/mm) 27
Professional factory of molding silicone rubber:We are manufacturer, and specialized in manufacturing different hardness, different viscosity silicone rubber series, we are competitive in price with good quality.
MINGCHENG GROUP LIMITED
| Item no. |
RTV1040 |
| Color |
Transparent |
| Viscosity |
65000 cps |
| Mix ratio |
100:10 |
| Pot life |
60 mins |
| Curing time |
12-24 hrs |
| Hardness |
40 shore A |
| Tensile strength |
5 Mpa |
| Elongation |
350% |
| Tear Strength |
27 N/mm |
| Shrinkage |
0.1% |
Your message must be between 20-3,000 characters!
