Send Message

Customer First, Dedication, Innovation.

MC Silicone Professional Mould Making & Casting Materials Supplier

Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
Home ProductsSilicone Liquid Rubber

Different Hardness Tin Curing Silicone Rubber 15 Shore a and ≤0.3% Shrinkage

Different Hardness Tin Curing Silicone Rubber 15 Shore a and ≤0.3% Shrinkage

  • Different Hardness Tin Curing Silicone Rubber 15 Shore a and ≤0.3% Shrinkage
  • Different Hardness Tin Curing Silicone Rubber 15 Shore a and ≤0.3% Shrinkage
  • Different Hardness Tin Curing Silicone Rubber 15 Shore a and ≤0.3% Shrinkage
  • Different Hardness Tin Curing Silicone Rubber 15 Shore a and ≤0.3% Shrinkage
  • Different Hardness Tin Curing Silicone Rubber 15 Shore a and ≤0.3% Shrinkage
Different Hardness Tin Curing Silicone Rubber 15 Shore a and ≤0.3% Shrinkage
Product Details:
Place of Origin: CHINA
Brand Name: MC Silicone
Certification: SGS,REACH
Model Number: MCSIL-2015
Payment & Shipping Terms:
Minimum Order Quantity: 120kg
Price: Negotiable
Packaging Details: 5kg, 10kg, 20kg, 200kg/ drum
Delivery Time: 5-8 work days
Payment Terms: L/C, T/T, Western Union, Western Union,Paypal
Supply Ability: 4000 per day
Contact Now
All Products
Silicone Liquid Rubber (101)
Platinum Cure Silicone Rubber (181)
Tin Cure Silicone Rubber (156)
Polyurethane Liquid Rubber (54)
Silicone Encapsulants (18)
Life Casting Silicone Rubber (23)
Polyurethane Mold Rubber (12)
Clear Epoxy Resin (27)
Dimethyl Silicone Oil (17)
Silicone Mold Putty (35)
Electronic Potting Silicone (15)
Silicone Mold Making Material (11)
Injection Molding Silicone (3)
HTV Silicone Rubber (5)
Detailed Product Description
Model NO.: MCSIL-2015 Mixed Viscosity: 16700 Cps
Hardness: 15 Shore A Tear Strength: 28 N/Mm
Elongation At Break: 600% Mixing Ratio: 100:5
Tensile Strength: 3.8 MPA Shrinkage: ≤0.3%
Highlight:

15 Shore a Silicone Rubber

,

0.3% Shrinkage Silicone Rubber

,

Tin Curing Silicone Rubber

Product Description

Description of Resin Arts Mold Making RTV Silicone Rubber

MC RTV2 mold making silicone rubber is a two-component material, this kind of silicone rubber consists of Part A base silicone and Part B CA30 curing agent, and Part A base silicone and Part B curing agent can cure at room temperature by a condensation reaction. These materials can be cast into the cured silicone molds: Plaster polyurethane, PU, GRC, cement, resin, polyester, wax etc...

Features of Resin Arts Mold Making RTV Silicone Rubber

1. Good flowability and long working time
2. Medium hardness
3. High tear and tensile strength
4. Easy de-mould from complex replica parts
5. Acid and alkali-resistance
6. Low linear shrinkage

Applications of Resin Arts Mold Making RTV Silicone Rubber

MCSIL-20 silicone rubber is suited for reproduction of middle size cement molds, concrete stones, artificial stones, plaster molds, figures, art objects, decoration molds, GRC products, gypsum products, resin products, PU molds. etc...
Resin Arts Mold Making RTV Silicone Rubber
How to make the silicone mold?

1. Preparing
The surface of the original objects should be clean and free of loose material. If your products have thin flower patterns, and especially have porous substrates, please use a suitable mold release agent such as soap water, detergent, Vaseline or petroleum jelly.

2. Mixing
Please weigh Part A silicone base and part B CA30 Curing Agent with ratio of 100: 2 into a clean container. Stir Part A base silicone thoroughly before use, then Mix Part A and Part B evenly until the curing agent completely dispersed in the silicone base. Manual or mechanical mixture can be used, but do not last much time or allow the temperature to exceed 35C (95F). It's suitable to mix small quantities to ensure thorough mixture of silicone base and curing agent.
Note: It is strongly recommended that entrapped air be removed in a vacuum chamber, allowing the mixture to completely expand and then collapse. After a further 1 to 2 minutes under vacuum, the mixture should be inspected and can be used if free of air bubbles. A volume increase of 3-5 times will occur on vacuum de-airing the mixture. So a suitably large container should be chosen.

3. Pouring the mixture and curing
Pour the mixed Part A base silicone and CA-30 curing agent as soon as possible onto the original object, avoiding air entrapment. The catalyzed material will cure to a flexible rubber within 6 hours (or faster by different mixing ratio or room temperature), we advice you de-mold after 24 hours, it is will improve the replicate times of silicone mold.
Resin Arts Mold Making RTV Silicone Rubber
Packing of Resin Arts Mold Making RTV Silicone Rubber

Part A base silicone: 20kg/drum, 25kg/drum or 200kg/drum
Part B CA30 Curing Agent: 0.25kg/bottle, 1kg/bottle and 10kg/bottle

Storage of Resin Arts Mold Making RTV Silicone Rubber

When the silicone rubber is stored at or below 30 C (85F) in the original unopened containers, silicone Base and CA30 Curing agent have a usable life of 9 months from the date of production.

Note of Resin Arts Mold Making RTV Silicone Rubber

RTV2 silicone rubber is an industrial product and must not be used in food molding, dental human skin molding applications.

Resin Arts Mold Making RTV Silicone Rubber
Need more information, please feel free to contact us.
 

Tag:

liquid silicone rubber for mold making,

Condensation Cure Silicone Liquid Rubber,

high temperature silicone moulding rubber

Contact Details
MINGCHENG GROUP LIMITED

Contact Person: Mrs. Amy Tse

Tel: +86-18664910896

Fax: 86-769-82696808

Send your inquiry directly to us (0 / 3000)

Connect online
Sitemap
Products
Home
Privacy Policy | China Good Quality Silicone Liquid Rubber Supplier.
© 2021 - 2025 siliconeliquidrubber.com. All Rights Reserved.

No.2, Zhouliao Road, Langzhou Industrial Zone, Changping, Dongguan, Guangdong, China

info@mcsilicone.com

Mobile Site

Want to know more about us ？ Just contact us