Send Message

Customer First, Dedication, Innovation.

MC Silicone Professional Mould Making & Casting Materials Supplier

Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
Home ProductsTin Cure Silicone Rubber

White Condensation RTV2 Silicone Rubber for Resin Mold Making

White Condensation RTV2 Silicone Rubber for Resin Mold Making

  • White Condensation RTV2 Silicone Rubber for Resin Mold Making
  • White Condensation RTV2 Silicone Rubber for Resin Mold Making
  • White Condensation RTV2 Silicone Rubber for Resin Mold Making
  • White Condensation RTV2 Silicone Rubber for Resin Mold Making
  • White Condensation RTV2 Silicone Rubber for Resin Mold Making
White Condensation RTV2 Silicone Rubber for Resin Mold Making
Product Details:
Place of Origin: CHINA
Brand Name: MC Silicone
Certification: SGS,REACH
Model Number: MCSIL-2015
Payment & Shipping Terms:
Minimum Order Quantity: 120kg
Price: Negotiable
Packaging Details: 5kg, 10kg, 20kg, 200kg/ drum
Delivery Time: 5-8 work days
Payment Terms: L/C, T/T, Western Union, Western Union,Paypal
Supply Ability: 4000 per day
Contact Now
All Products
Silicone Liquid Rubber (101)
Platinum Cure Silicone Rubber (167)
Tin Cure Silicone Rubber (145)
Polyurethane Liquid Rubber (53)
Silicone Encapsulants (18)
Life Casting Silicone Rubber (23)
Polyurethane Mold Rubber (12)
Clear Epoxy Resin (27)
Dimethyl Silicone Oil (17)
Silicone Mold Putty (35)
Electronic Potting Silicone (15)
Silicone Mold Making Material (11)
Injection Molding Silicone (3)
HTV Silicone Rubber (5)
Detailed Product Description
Mixing Ratio: 100:2 Or 100:5 Tin Cure Silicone Viscosity: 15000cps
Pot Life: 30~40 Mins Curing Time: 4~6 Hrs
Hardness: 13-15 Shore A Tear Strength: 25 N/mm
Tensile Strength: 3.8 MPa Shelf Life: 12 Months
Highlight:

RTV2 Silicone Moulding Rubber

,

White Condensation RTV2 Silicone Moulding Rubber

,

Resin Mold Making Silicone Moulding Rubber

Product Description

Description of RTV-2 Silicone Rubber for Resin Mold Making

MC RTV2 mold making silicone rubber is a two-component material, this kind of silicone rubber consists of Part A base silicone and Part B CA30 curing agent, and Part A base silicone and Part B curing agent can cure at room temperature by a condensation reaction. These materials can be cast into the cured silicone molds: Plaster polyurethane, PU, GRC, cement, resin, polyester, wax etc...

White Condensation RTV2 Silicone Moulding Rubber for Resin Mold Making
Features of RTV-2 Silicone Rubber for Resin Mold Making

1. Good flowability and long working time
2. Medium hardness
3. High tear and tensile strength
4. Easy de-mould from complex replica parts
5. Acid and alkali-resistance
6. Low linear shrinkage

Applications of RTV-2 Silicone Rubber for Resin Mold Making

RTV2 silicone rubber is suited for reproduction of middle size cement molds, concrete stones, artificial stones, plaster molds, figures, art objects, decoration molds, GRC products, gypsum products, resin products, PU molds. etc...

White Condensation RTV2 Silicone Moulding Rubber for Resin Mold Making
How to make the silicone mold?

1. Preparing
The surface of the original objects should be clean and free of loose material. If your products have thin flower patterns, and especially have porous substrates, please use a suitable mold release agent such as soap water, detergent, Vaseline or petroleum jelly.

2. Mixing
Please weigh Part A silicone base and part B CA30 Curing Agent with ratio of 100: 2 into a clean container. Stir Part A base silicone thoroughly before use, then Mix Part A and Part B evenly until the curing agent completely dispersed in the silicone base. Manual or mechanical mixture can be used, but do not last much time or allow the temperature to exceed 35C (95F). It's suitable to mix small quantities to ensure thorough mixture of silicone base and curing agent.
Note: It is strongly recommended that entrapped air be removed in a vacuum chamber, allowing the mixture to completely expand and then collapse. After a further 1 to 2 minutes under vacuum, the mixture should be inspected and can be used if free of air bubbles. A volume increase of 3-5 times will occur on vacuum de-airing the mixture. So a suitably large container should be chosen.

3. Pouring the mixture and curing
Pour the mixed Part A base silicone and CA-30 curing agent as soon as possible onto the original object, avoiding air entrapment. The catalyzed material will cure to a flexible rubber within 6 hours (or faster by different mixing ratio or room temperature), we advice you de-mold after 24 hours, it is will improve the replicate times of silicone mold.

Packing of RTV-2 Silicone Rubber for Resin Mold Making

Part A base silicone: 20kg/drum, 25kg/drum or 200kg/drum
Part B CA30 Curing Agent: 0.25kg/bottle, 1kg/bottle and 10kg/bottle

White Condensation RTV2 Silicone Moulding Rubber for Resin Mold MakingWhite Condensation RTV2 Silicone Moulding Rubber for Resin Mold Making
Storage of RTV-2 Silicone Rubber for Resin Mold Making

When the silicone rubber is stored at or below 30 C (85F) in the original unopened containers, SILASTIC RTV Base and CA30 Curing agent have a usable life of 9 months from the date of production.

Note of RTV-2 Silicone Rubber for Resin Mold Making

RTV2 silicone rubber is an industrial product and must not be used in food molding, dental human skin molding applications.

Tag:

CA30 Tin Cure Silicone Rubber,

Pourable Tin Cure Silicone Rubber,

3.8MPA Tin Cure Silicone Rubber

Contact Details
MINGCHENG GROUP LIMITED

Contact Person: Mrs. Amy Tse

Tel: +86-18664910896

Fax: 86-769-82696808

Send your inquiry directly to us (0 / 3000)

Connect online
Sitemap
Products
Home
Privacy Policy | China Good Quality Silicone Liquid Rubber Supplier.
© 2021 - 2025 siliconeliquidrubber.com. All Rights Reserved.

No.2, Zhouliao Road, Langzhou Industrial Zone, Changping, Dongguan, Guangdong, China

info@mcsilicone.com

Mobile Site

Want to know more about us ？ Just contact us