Platinum Cured Liquid Silicone Rubber Plaster, Concrete Mold Making
What is RTV-2 platinum cured liquid silicone rubber
Two-component addition type silicone rubber Silicone Rubber is a two-part, platinum-catalyzed, liquid silicone system that cures (RTV) to elastic rubber. The polymerization can be accelerated by heat. The silicone components are delivered as liquids, which once mixed and cured transform into a transparent, elastic and resistant material. Polymerization occurs without formation of heat.
What are the Applications of MCPLA-L20A/B RTV-2 platinum cured silicone rubber
1.RTV2 platinum cure silicone rubber is commonly used for making molds for industrial parts,various materials such as resins, plaster, and concrete, decorative objects.
2.Food and Confectionery: RTV2 platinum cure silicone rubber is used in the food and confectionery industry for creating molds for chocolates, candies, and other food items.
What are the Advantages of MCPLA-L20A/B RTV-2 platinum cured silicone rubber
#Easy to Operate : Due to the Room Temperature Cured feature and Low Viscosity, It's easy to use platinum liquid silicone rubber for your DIY Projects at home. No need for vacuum Pumping .
#High Tear Strength: RTV2 platinum cure silicone rubber has a high tear strength, making it ideal for making complex molds that require multiple demolding cycles.
#Easy Release: RTV2 platinum cure silicone rubber has excellent release properties, which means that the mold or casting can be easily removed from the mold without causing damage to the final product.
#Non-Toxic and Skin Safe: RTV2 platinum cure silicone rubber is non-toxic and skin safe, making it safe for use in applications that come into contact with skin or food.
|Viscosity ( cps,approx.)
|Mix ratio (A:B)
|Working time(at 25℃ ,minutes)
|Curing time(at 25℃,hrs,approx.)
|Hardness Shore A(after 24 h)
|Tensile Strength(Mpa,after 24 h)
|Linear Shrinkage (%)
Processing and Instructions of Addition Cure Silicones
1. Mixing the two components
According the mixing ration 10:1 or 1:1 weighting A and B, the two components may be thoroughly mixed either by hand or using a low-speed electric to minimize the degassing of bubbles and to avoid any temperature increase. Note: It is also possible to use a special mixing and dispensing machine for the silicone components, further information is available upon request.
The mixture should be degassed preferably at 30 to 50 mbar to eliminate any entrapped air. If a dispensing machine is used, the two components are degassed separately prior to mixing. The silicone mixture expands to 3-4 times of its initial volume and bubbles rise to the surface. The bubbles progressively disappear and the mixture returns to its initial volume after 5 to 10 minutes. Wait a few minutes to complete the degassing and then flash the vacuum. The silicone is ready for pouring, either by gravity or under low pressure.
Note: Flashing the vacuum once or twice accelerates the degassing. It is recommended to use a container with a high diameter/height ratio (3 to 4 times of the initial volume)
The curing may be slowed down at lower temperature or accelerated by applying heat.
Contamination from sulfur (e.g., sulfur-based clay), amines, tin compounds, cured polyester resin, some paints and some silicone rubbers may inhibit surface cure of platinum-cured rubbers.
Apply a release agent, Although not usually necessary, a release agent will make demolding easier when casting into most surfaces.
20kg per drum, 200kg per drum
Storage and shelf life
MC Silicone MCPLA -H Series should be used within 12 months from the manufacturing date. Beyond this date, MC silicone no longer guarantees the products confirms with the sales Specification. In order to preserve best properties it is recommended to follow strictly the following guild lines:
Store the original packing tightly sealed and at a temperature below 30 degree Celsius.
Use the product as soon as the packaging has been opened.
MINGCHENG GROUP LIMITED with brand MC Silicone,established in 2011, is a professional manufacturer of silicone mould making and casting materials based in Dongguan, China.
Our professional approach to all our work, together with creative ideas and strong technical skills, enable us to produce high quality, cost effective materials.
Our products include:
1.Condensation cure silicones for making molds for gypsum, concrete and resin arts and crafts, candle soap and shoe mold,
2.Addition cure silicones for making molds for jewelry, rapid prototype, food grade silicone for chocolates and cakes,life casting silicone.
3.Addition cure silicone putty for equine hoof cushion making, resin crafts mold making.
4.silicone potting compound for electronics encapsulating.