Send Message

Customer First, Dedication, Innovation.

MC Silicone Professional Mould Making & Casting Materials Supplier

About Us
Factory Tour
Quality Control
Contact Us
Home ProductsSilicone Liquid Rubber

Two Parts RTV2 Liquid Platinum Silicone Rubber for Candy Fondant Molds

Two Parts RTV2 Liquid Platinum Silicone Rubber for Candy Fondant Molds

  • Two Parts RTV2 Liquid Platinum Silicone Rubber for Candy Fondant Molds
  • Two Parts RTV2 Liquid Platinum Silicone Rubber for Candy Fondant Molds
  • Two Parts RTV2 Liquid Platinum Silicone Rubber for Candy Fondant Molds
  • Two Parts RTV2 Liquid Platinum Silicone Rubber for Candy Fondant Molds
Two Parts RTV2 Liquid Platinum Silicone Rubber for Candy Fondant Molds
Product Details:
Place of Origin: CHINA
Brand Name: MC
Model Number: MCPLA-L15 A/B
Payment & Shipping Terms:
Minimum Order Quantity: 240kg
Price: Negotiable
Packaging Details: 5kg, 20kg
Delivery Time: 3-5 working days after payment
Payment Terms: L/C, D/P, T/T, Western Union
Contact Now
Detailed Product Description
Goods Description: Platinum Cured Silicone Rubber HS Code: 39100000
Type: Two Parts AB Liquid Silicone Color: Translucent
Mix Ratio: 1:1 Working Time: 20-30 Minutes
Curing Time: 4-6 Hours Hardness: 15 Shore A
Shelf Life: 12 Months
Highlight:

Two component Sex Toys Silicone

,

Sex Toys Silicone 39100000

,

Silicone Rubber HS Code 39100000

Two Parts RTV2 Liquid Platinum Silicone Rubber for Candy Fondant Molds


Product description

Two-component addition type silicone rubber Silicone Rubber is a two-part, platinum-catalyzed, liquid silicone system that cures (RTV) to a Shore A05 rubber. The polymerization can be accelerated by heat. The silicone components are delivered as liquids, which once mixed and cured transform into a transparent, elastic and resistant material. Polymerization occurs without formation of heat.

 

Technical Properties

Item No. MCPLA-L15A/B
Appearance Viscous liquid
Color Translucent/skin tone
Viscosity ( cps,approx.) 7000-9000
Mix ratio (A:B) 1:1
Working time(at 25℃ ,minutes) 30-40
Curing time(at 25℃,hrs,approx.) 6
Hardness Shore A(after 24 h) 15
Tensile Strength(Mpa,after 24 h) 3.5
Elongation(%) 550
Tear Strength(N/mm) 15
Linear Shrinkage (%) 0.1

 

 

Features

Very soft
Good flowability
Odorless
Long casting
Skin safe 
Easy processing - mixing ratio 1 : 1
Adjustable working time and curing time

 

Applications

Molding applications requiring low shrinkage e.g., resin jewelry, automotive, plaster, cement, cake decorations, candy fondant, etc.

Two Parts RTV2 Liquid Platinum Silicone Rubber for Candy Fondant Molds 0Two Parts RTV2 Liquid Platinum Silicone Rubber for Candy Fondant Molds 1

Processing and Instructions of Platinum Cure Silicones

 
1. Mixing the two components
According the mixing ration 10:1 or 1:1 weighting A and B, the two components may be thoroughly mixed either by hand or using a low-speed electric to minimize the degassing of bubbles and to avoid any temperature increase. Note: It is also possible to use a special mixing and dispensing machine for the silicone components, further information is available upon request.
 
2. Moulding
The mixture should be degassed preferably at 30 to 50 mbar to eliminate any entrapped air. If a dispensing machine is used, the two components are degassed separately prior to mixing. The silicone mixture expands to 3-4 times of its initial volume and bubbles rise to the surface. The bubbles progressively disappear and the mixture returns to its initial volume after 5 to 10 minutes. Wait a few minutes to complete the degassing and then flash the vacuum. The silicone is ready for pouring, either by gravity or under low pressure.
 
Note: Flashing the vacuum once or twice accelerates the degassing. It is recommended to use a container with a high diameter/height ratio (3 to 4 times of the initial volume)
 
3. Polymerisation
The curing may be slowed down at lower temperature or accelerated by applying heat.
Note:
Contamination from sulfur (e.g., sulfur-based clay), amines, tin compounds, cured polyester resin, some paints and some silicone rubbers may inhibit surface cure of platinum-cured rubbers.
 
 

Apply a release agent, Although not usually necessary, a release agent will make demolding easier when casting into most surfaces.

 
Packaging
20kg per drum, 200kg per drum

Two Parts RTV2 Liquid Platinum Silicone Rubber for Candy Fondant Molds 2

Two Parts RTV2 Liquid Platinum Silicone Rubber for Candy Fondant Molds 3


Storage and shelf life
MC Silicone MCPLA Series should be used within 12 months from the manufacturing date. Beyond this date, MC silicone no longer guarantees the products confirms with the sales Specification. In order to preserve best properties it is recommended to follow strictly the following guild lines:
Store the original packing tightly sealed and at a temperature below 30 degree Celsius.
Use the product as soon as the packaging has been opened.

Contact Details
MINGCHENG GROUP LIMITED

Contact Person: Mrs. Amy Tse

Tel: +86-18664910896

Fax: 86-769-82696808

Send your inquiry directly to us (0 / 3000)